Which Smokeless Fire Pit Accessories Are Actually Worth It?
The accessory range is most of the margin in this category, and most of it is optional. Three items change how often the pit gets used. The others solve problems you may not have.
DisclosureWe earn a commission when you buy through the links on this page, at no extra cost to you. Prices come from Amazon and change without notice. How this site is funded.
Three are worth buying for almost any smokeless pit: a lid, a stand and a cover. Everything else is situational. The lid is the one most people skip and should not — it smothers a dying fire, keeps rain out of the chamber and turns the pit into a table between burns. For a Solo Stove Bonfire the maker's own Bonfire Lid is the safe choice, and the Lidereja 19.5 in is the same 304 stainless and the same published diameter for roughly half the money. For a 22 in smokeless pit the FEBTECH snuffer lid is the only one here that publishes a steel gauge. Skip the carry bag unless the pit actually travels, and skip the bundle.
The class-by-class verdict
This is the whole page in one table. Everything below it is the reasoning.
| Accessory | Verdict | Why |
|---|---|---|
| Lid / snuffer | Buy | Puts the fire out, keeps rain out of the chamber, doubles as a table. Picked below |
| Stand or base | Buy if the pit sits on anything that can scorch | An air gap under the bowl is the only thing a mat cannot provide |
| Cover | Buy | The cheapest thing that extends the life of the pit. Rain in the chamber is what starts the corrosion |
| Heat deflector | Situational | Genuinely redirects heat outward, at the cost of some of the smokeless effect. Worth it in a cold shoulder season |
| Spark screen | Situational | A good smokeless pit throws few sparks. Buy one if the pit sits near anything combustible |
| Cooking grate | Situational | Only if you will actually cook. A swivel grate beats a flat one that rests on the rim |
| Tools and gloves | Buy the gloves, maybe the tools | Gloves are what let you move a hot lid or a hot pit. A poker is nice and not necessary |
| Carry bag | Skip unless it travels | A cover does the home job better for similar money |
| Ash pan, if not included | Skip as an add-on | It should be in the box. If it is not, that is a reason to look at another pit |
The three Buy rows add roughly a third to the cost of a mid-range smokeless pit. The Situational rows can double it.
Why the lid is the one people miss
Stands and covers get bought because the problems they solve are visible — a scorch mark on decking, a bowl full of rainwater. The lid solves three problems that are each slightly less obvious, which is why it tends to be the third or fourth purchase rather than the first.
- 1It ends the evening. A smokeless pit with a full load does not stop burning because you want to go inside. A lid smothers it by cutting the air to the fire, which is faster and far tidier than the drown-and-stir method and leaves dry ash rather than a bowl of sludge. How to put out a fire pit is the full method and explains why water is the correct answer when you need certainty.
- 2It keeps the chamber dry between burns. A smokeless pit is a double-walled cylinder with an open top. Rain goes into the chamber, into the air gap and onto the base plate, and sits there. That is where corrosion begins, and it is the reason the lid is a lifespan purchase rather than a convenience one.
- 3It is a table. A flat stainless disc on a pit the right height is a genuinely useful surface for drinks and plates. On a 27 in Yukon it is a real table, not a token one. Most lids in this category are marketed on this and bought for the first two reasons.
Branded or third party?
This is the question underneath most accessory decisions, and the answer is not the same for every class.
One caveat that applies to every third-party fit: there is no recourse to the pit's maker if the tolerance is wrong, and a lid that sits proud or rocks is not a warranty matter for anyone. On a lid, with one diameter to match, that risk is small. On anything that bolts to the pit, it is not.
Does one brand have better accessories than the other?
This comes up constantly in the Solo Stove and Breeo comparison, and it is worth separating into two questions, because they have different answers.
On range, Solo Stove is the broader ecosystem — lids, stands, shelters and tools are all available as own-brand parts, and the third-party market has grown up around its dimensions because the pits are so widely owned. If you want a part, something fits a Bonfire. On the parts that matter, the gap is much narrower than the catalog suggests: the three accessories worth buying are a lid, a stand and a cover, and all three exist for both pits, from the maker and from third parties.
So the accessory range is a weak reason to choose between them. Solo stove vs Breeo compares them on the things that should actually decide it — weight, alloy and whether you intend to cook — and the warranty comparison covers the other question people ask in the same breath.
How we judged these
- Each accessory class is judged before any product in it: does it change how often the pit gets used, or does it solve a problem most owners do not have?
- Classes this site already covers in depth are judged here and then linked out to, not re-ranked. This page exists to answer which to buy, not to duplicate five roundups.
- The picks on this page are lids and snuffer lids, the one class with real demand and no dedicated roundup anywhere on the site.
- Lids are ranked on published fit first — a named model or a stated diameter — then on published alloy or gauge, which is what decides whether a lid warps on a warm pit.
- What we did not do: own, fit or test any accessory. Every figure comes from the current retail listing and is cited on the product card.
We have not burned any of these units, and we do not claim to have. The full method, including what it cannot tell you.
The lids and snuffers
| # | Product | Best for | Key spec | Price |
|---|---|---|---|---|
| 1 |  Solo Stove Bonfire LidThe maker's own 304 stainless lid for the Bonfire. It is the only lid here whose fit is not an inference from a diameter, and it is roughly twice the price of the third-party lids that copy it. | A Bonfire owner who wants the fit guaranteed | 304 stainless steel | $79.99 · View on Amazon |
| 2 |  Lidereja 19.5 in Stainless Lid for Solo Stove Bonfire304 stainless at 19.5 in, built for the Bonfire, at roughly half what the branded lid costs. The alloy is the same figure published on both, which is the whole case for buying this one. | The same alloy for about half the money | 304 stainless steel | $44.99 · View on Amazon |
| 3 |  FEBTECH 22.5 in Fire Pit Snuffer LidSixteen-gauge carbon steel with dual wooden handles, sized to fit 22.1 in smokeless pits. It is the single lid in this set that publishes a steel thickness, which is the figure that decides whether a lid warps. | The only lid here with a published gauge | 16-gauge carbon steel | $59.99 · View on Amazon |
| 4 |  Solo Stove Yukon LidThe 27 in equivalent of the Bonfire lid, in the same 304 stainless. There is effectively no third-party competition at this diameter, which is why it is also the most expensive lid here. | Yukon owners | 304 stainless steel | $129.99 · View on Amazon |
| 5 |  Hydream 32 in Fire Pit Lid with PokerThirty-two inches of lid for pits up to 30 in, with a poker in the box. This is the size nobody else in the category makes, and it is the answer for a wide masonry-style bowl rather than a smokeless cylinder. | A big open patio bowl | Metal, alloy not stated | $49.99 · View on Amazon |
Prices are pulled live from Amazon. Where no live price is showing, the button reads “check price” rather than a number we cannot stand behind.
Solo Stove Bonfire Lid
Solo StoveThe maker's own 304 stainless lid for the Bonfire. It is the only lid here whose fit is not an inference from a diameter, and it is roughly twice the price of the third-party lids that copy it.
The maker's own 304 stainless lid for the Bonfire. It is the only lid here whose fit is not an inference from a diameter, and it is roughly twice the price of the third-party lids that copy it.
- 304 stainless, the same alloy as the pit, so the lid ages at the same rate as the thing it sits on
- Fit is specified by model, not by a diameter you have to measure and hope
- Flat top is genuinely usable as a table between burns
- Around double the price of third-party 19.5 in lids in the same alloy
- Bonfire only — it will not transfer if you size up to a Yukon
- No weight published, and a stainless lid is heavier than people expect
Bonfire owners who would rather not measure anything.
You are comfortable matching a 19.5 in diameter yourself. The saving is real.
We have not burned this unit. These are the things a specification sheet cannot answer, listed rather than glossed over.
- Weight
- Steel thickness, which Solo Stove does not publish for the lid
#ad how we are funded · price as of October 18, 2026
Lidereja 19.5 in Stainless Lid for Solo Stove Bonfire
Lidereja304 stainless at 19.5 in, built for the Bonfire, at roughly half what the branded lid costs. The alloy is the same figure published on both, which is the whole case for buying this one.
304 stainless at 19.5 in, built for the Bonfire, at roughly half what the branded lid costs. The alloy is the same figure published on both, which is the whole case for buying this one.
- Publishes both the alloy and the diameter, so it is directly comparable with the branded lid
- Roughly half the price for the same stated material
- 19.5 in is the Bonfire's published outer diameter, so the fit claim is checkable
- Third-party fit means no recourse to Solo Stove if the tolerance is off
- Waterproof is claimed for a lid that sits on an open-bottomed pit — water still gets in from below
- No thickness published, and thin stainless warps when it goes on a warm pit
Bonfire owners happy to buy on the published diameter.
You want the maker's warranty path on an accessory.
We have not burned this unit. These are the things a specification sheet cannot answer, listed rather than glossed over.
- Steel thickness
- How tightly it actually seats on a 2.0 versus a 1.0 Bonfire
#ad how we are funded · price as of October 18, 2026
FEBTECH 22.5 in Fire Pit Snuffer Lid
FEBTECHSixteen-gauge carbon steel with dual wooden handles, sized to fit 22.1 in smokeless pits. It is the single lid in this set that publishes a steel thickness, which is the figure that decides whether a lid warps.
Sixteen-gauge carbon steel with dual wooden handles, sized to fit 22.1 in smokeless pits. It is the single lid in this set that publishes a steel thickness, which is the figure that decides whether a lid warps.
- A published gauge, which nothing else in this category gives you
- Wooden handles stay cool enough to lift a lid off a warm pit without gloves
- Stated to fit a specific pit diameter rather than a vague range
- Carbon steel, not stainless — it will rust where the stainless lids will not
- 22.1 in is a narrow fit window; a 19.5 in Bonfire is the wrong size entirely
- Wooden handles on an outdoor product are the part that weathers first
Owners of a 22 in smokeless pit who want a snuffer that will not warp.
The pit lives uncovered. Carbon steel and permanent weather do not mix.
We have not burned this unit. These are the things a specification sheet cannot answer, listed rather than glossed over.
- Whether it carries any coating over the carbon steel
- How quickly the wooden handles need re-oiling
#ad how we are funded · price as of October 18, 2026
Solo Stove Yukon Lid
Solo StoveThe 27 in equivalent of the Bonfire lid, in the same 304 stainless. There is effectively no third-party competition at this diameter, which is why it is also the most expensive lid here.
The 27 in equivalent of the Bonfire lid, in the same 304 stainless. There is effectively no third-party competition at this diameter, which is why it is also the most expensive lid here.
- 304 stainless matched to the pit it covers
- At 27 in it makes a genuinely useful table, not a token one
- Almost no alternative exists at this diameter in this alloy
- The most expensive lid in this set by a clear margin
- A 27 in stainless disc is heavy and awkward for one person
- No weight published, which on something this size matters
Yukon owners who want the pit covered and a table out of it.
You move the pit often — this is one more large heavy object to store.
We have not burned this unit. These are the things a specification sheet cannot answer, listed rather than glossed over.
- Weight
- Steel thickness
#ad how we are funded · price as of October 18, 2026
Hydream 32 in Fire Pit Lid with Poker
HydreamThirty-two inches of lid for pits up to 30 in, with a poker in the box. This is the size nobody else in the category makes, and it is the answer for a wide masonry-style bowl rather than a smokeless cylinder.
Thirty-two inches of lid for pits up to 30 in, with a poker in the box. This is the size nobody else in the category makes, and it is the answer for a wide masonry-style bowl rather than a smokeless cylinder.
- Covers the 30 in bowl size that most lid makers ignore entirely
- Publishes a fit ceiling rather than a single exact diameter, which is the honest way to size this
- A poker included is a genuine extra, not packaging
- Metal with no alloy named — almost certainly painted carbon steel at this price
- Black paint on something that goes on a warm pit will discolor
- Too large for every smokeless pit this site covers
Owners of a wide open patio fire bowl, 28 to 30 in across.
Your pit is a 19 to 25 in smokeless unit — this will sit on it like a hat.
We have not burned this unit. These are the things a specification sheet cannot answer, listed rather than glossed over.
- Alloy and gauge
- Whether the finish is paint or high-temp coating
#ad how we are funded · price as of October 18, 2026
Sizing a lid, in one step
Measure the outer diameter of the pit at the rim, and buy a lid that states that number or the model by name. That is the whole exercise. A Bonfire is 19.5 in, a Yukon is 27 in, and most of the mid-size smokeless pits from other brands land between 19 and 22 in.
The one trap is lids stated as a fit ceiling rather than an exact size — the Hydream here is 32 in and fits pits up to 30 in. That is the honest way to sell a lid, and it means the lid overhangs. On a wide patio bowl that is fine. On a 19.5 in smokeless cylinder a 32 in lid is simply the wrong product.
What we would skip
- Buying the accessory bundle with the pit
Bundles are priced to look like a saving and they include the items with the thinnest case — usually a carry bag and a cooking attachment. Buy the pit, use it for a month, then buy the two or three things the month showed you that you needed.
- A carry bag for a pit that lives on the patio
It protects the pit in a car. It does nothing at home, where a cover does the job better and costs about the same. If the pit has never been in a vehicle, this is the clearest skip in the category.
- A branded accessory where the fit is a published diameter
Where an accessory is defined by one measurement — a lid, a stand, a deflector — a third party publishing the same diameter in the same alloy is the same product for less. Where fit is complex or the part attaches to the pit, the branded version is worth it.
- A second pit's worth of accessories
Add a lid, a stand, a deflector, a cooking ring, a cover and a stand bag to a mid-range smokeless pit and you have spent the price of the next pit up. At that point the honest comparison is against the bigger pit, not against the accessory list.