Breeo X Series 24
62 pounds of weathering steel that is meant to rust, made in Pennsylvania, with a rim designed as a cooking surface. Placed once, and permanently.
DisclosureWe earn a commission when you buy through the links on this page, at no extra cost to you. Prices come from Amazon and change without notice. How this site is funded.
A 62 lb corten fire pit with a 23.5 in bowl, made in Lancaster, Pennsylvania, carrying a lifetime warranty to the original purchaser that does not cover the finish — because the finish is rust, on purpose. Buy it for a permanent spot on gravel or grass, and to cook on.
| # | Product | Best for | Key spec | Price |
|---|---|---|---|---|
| 1 | BreeoPhoto via Amazon Breeo X Series 2462 lb of corten meant to stay where you put it, with a rim designed as a cooking surface. The heaviest pit here and the only one built around a searing ring. | Cooking and permanence | Corten weathering steel | Check price on Amazon |
Prices are pulled live from Amazon. Where no live price is showing, the button reads “check price” rather than a number we cannot stand behind.
Breeo X Series 24
Breeo62 lb of corten meant to stay where you put it, with a rim designed as a cooking surface. The heaviest pit here and the only one built around a searing ring.
62 lb of corten meant to stay where you put it, with a rim designed as a cooking surface. The heaviest pit here and the only one built around a searing ring.
- Corten forms a stable oxide layer instead of pitting through, which is why it is sold uncoated
- The rim is a genuine cooking surface with a searing-ring accessory, not a marketing line
- Made in Pennsylvania, which is verifiable and unusual in this category
- 62 lb means it is placed once. Check clearance before, not after
- Corten stains whatever it sits on. Concrete and pavers underneath will discolor
- Nothing about the finish is warranted, because the finish is rust
A permanent spot on gravel or grass where the pit is part of the yard, and someone who will actually cook on it.
The pit has to live on a finished patio, a deck, or anywhere a runoff stain matters. Stainless is the answer there.
We have not burned this unit. These are the things a specification sheet cannot answer, listed rather than glossed over.
- How fast the patina stabilizes in your climate. Humid and coastal air behave differently and Breeo does not publish a timeline
- Whether the heat-output figures circulating for this pit come from a standard test. We found no published method behind them
#ad how we are funded · no live price right now
Corten is a decision, not a defect
Weathering steel is alloyed so that the rust it forms is dense, adherent and self-limiting rather than flaky and progressive. The oxide layer becomes the protective coating. This is the same reasoning behind corten-clad buildings and weathering-steel bridges: you accept the appearance in exchange for not having to maintain a finish.
For a fire pit that lives permanently on gravel or grass, this is the right answer, and it will very likely outlast a stainless pit in the same spot. For a pit on a patio it is the wrong answer, decisively: corten runoff stains concrete, pavers and decking, and the stain is permanent. There is no maintenance regime that avoids it. Corten vs stainless, in full.
62 pounds means you place it once
The X24 weighs three times what a Solo Stove Bonfire weighs. That is not a portability complaint — the pit is not sold as portable — it is a planning instruction. Measure the clear radius your local rules require before it arrives, because moving it afterwards is a two-person job and the ground under it will already have started to stain.
It also means the pit is furniture, in the sense that it becomes part of the yard's layout. Think about where people sit, where the prevailing wind takes the smoke, and how far it is from the fence, which counts as combustible material. The clearance table.
The cooking case
Breeo's rim is a flat working surface designed to take a searing ring — a steel griddle that sits around the fire and cooks by conduction from the pit itself. That is a fundamentally different proposition from a grate suspended over flames, and it is the main reason to choose this pit over a stainless one. Solo Stove sells good cooking accessories; Breeo designed the pit as one.
The trade is cleanup. There is no removable ash pan. Ash removal is a shovel and a bucket, which on a 23.5 in bowl is a real chore. Cooking over a fire pit, by format.
The claims we left out
Heat-output figures for this pit circulate widely — you will see a five-digit BTU number attached to it in several places. We have not been able to find a published test method behind any of them, and a BTU figure for a wood-burning appliance is meaningless without specifying the wood, its moisture and the quantity alight. So it does not appear on this page. Why we do not publish wood-pit BTU numbers.
Alternatives
- Breeo X Series 19 — the same construction at 22.1 in and 47 lb, for a smaller yard.
- [Solo Stove Bonfire 2.0](/smokeless-fire-pits/solo-stove-bonfire-2-0) — stainless, a third of the weight, no staining. The comparison.
- Solo Stove Yukon 2.0 — comparable fire size in stainless, if the surface underneath matters.
- Every figure is a manufacturer or retailer published number, cited individually.
- Heat-output claims circulating for this pit are excluded, because we could not source a method behind them.
- What we did not do: burn it, cook on it, or assess the patina in any climate.
We have not burned any of these units, and we do not claim to have. The full method, including what it cannot tell you.