The Best Fire Pit Wind Guards
A gas flame is far more vulnerable to wind than a wood fire, and a wind guard is the only fix that does not involve turning the burner up. The hard part is buying one that fits.
DisclosureWe earn a commission when you buy through the links on this page, at no extra cost to you. Prices come from Amazon and change without notice. How this site is funded.
Measure the burner opening, not the table, then buy the guard that publishes all three of its dimensions and states tempered glass. Rectangular guards suit the long trough on most gas tables; round bowls need a round guard, and there are far fewer of those.
How we judged these
- Ranked on published dimensions first, because this is a fit-critical purchase and a guard that does not state all three of its dimensions cannot be matched to a burner.
- Then on stated tempering, which is the safety-relevant material fact and which only some listings will commit to.
- Then on bracket and foot material — aluminum brackets and rubber feet are the two details that decide whether the glass survives a season on a stone tabletop.
- Every dimension and material claim is quoted from the current retail listing and cited on that product's own spec sheet. Where a listing publishes nothing, the row says so.
- What we did not do: fit any of these to a table, wind-test a guard, or verify a tempering claim.
We have not burned any of these units, and we do not claim to have. The full method, including what it cannot tell you.
| # | Product | Best for | Key spec | Price |
|---|---|---|---|---|
| 1 |  Nuu Garden Rectangular Wind Guard, 28.7 x 10.2 x 5.5 inThe size most propane fire tables actually are. Tempered glass with aluminum alloy corner brackets at 28.7 x 10.2 in covers the long, narrow burner trough that comes on the majority of patio gas tables, and the price is reasonable for the coverage. | A standard rectangular fire table | Tempered glass | $47.27 · View on Amazon |
| 2 |  BOMINICA Glass Wind Guard, 15 x 15 x 6.5 in SquareTempered glass, aluminum corner brackets, rubber feet, and every dimension published. On a square burner up to about 15 in, this is the cheapest way to stop the wind laying your flame flat and blowing it out. | Small square burners | Clear tempered glass | $39.99 · View on Amazon |
| 3 |  BriSunshine Wind Guard, 41.5 x 13.5 x 6 in RectangularThe largest guard here at 41.5 in long, with thick tempered glass, aluminum corner brackets and rubber feet. Big rectangular dining tables with a full-length burner are exactly the tables that suffer most in wind, and nothing smaller covers them. | Long dining-height fire tables | Thick tempered glass | $77.59 · View on Amazon |
| 4 |  BriSunshine Glass Wind Guard, 16 x 16 x 6 inSixteen inches square and 6 in tall, from the same maker as the 41.5 in guard. The listing is thin compared with that one, but all three dimensions are published, which is the minimum you need to buy glass that has to fit. | A 16 in square table burner | Glass | $47.49 · View on Amazon |
| 5 |  Skyflame Round Glass Wind Guard, 33 x 7 inThe only round guard here, and at 33 in across it covers the large round gas bowls that every rectangular guard ignores. It is also the tallest at 7 in. Expensive, but for a round table there is genuinely not much competition. | Round gas bowls and round tables | Glass | $149.99 · View on Amazon |
| 6 |  vchin Square Glass Wind Guard, 17.5 inSquare and 17.5 in, filling the gap between the 15 in BOMINICA and the rectangular guards. The listing publishes the width and nothing else, so it is a fit-first purchase rather than a spec-led one. | Mid-size square burners | Glass | $51.99 · View on Amazon |
Prices are pulled live from Amazon. Where no live price is showing, the button reads “check price” rather than a number we cannot stand behind.
Nuu Garden Rectangular Wind Guard, 28.7 x 10.2 x 5.5 in
Nuu GardenThe size most propane fire tables actually are. Tempered glass with aluminum alloy corner brackets at 28.7 x 10.2 in covers the long, narrow burner trough that comes on the majority of patio gas tables, and the price is reasonable for the coverage.
The size most propane fire tables actually are. Tempered glass with aluminum alloy corner brackets at 28.7 x 10.2 in covers the long, narrow burner trough that comes on the majority of patio gas tables, and the price is reasonable for the coverage.
- Matches the long narrow burner trough that most gas fire tables use
- Aluminum alloy brackets rather than plated steel
- Sensibly priced for nearly 29 in of coverage
- At 5.5 in it is the shortest guard here — the least protection in real wind
- Rectangular trough sizes vary a lot between brands; measure before ordering
- No published glass thickness
Anyone with a standard rectangular propane fire table and a breezy patio.
Your table's trough is longer than about 29 in — step up to the 41.5 in BriSunshine.
We have not burned this unit. These are the things a specification sheet cannot answer, listed rather than glossed over.
- Glass thickness
- Bracket fit tolerance across table brands
#ad how we are funded · price as of October 18, 2026
BOMINICA Glass Wind Guard, 15 x 15 x 6.5 in Square
BOMINICATempered glass, aluminum corner brackets, rubber feet, and every dimension published. On a square burner up to about 15 in, this is the cheapest way to stop the wind laying your flame flat and blowing it out.
Tempered glass, aluminum corner brackets, rubber feet, and every dimension published. On a square burner up to about 15 in, this is the cheapest way to stop the wind laying your flame flat and blowing it out.
- Rubber feet are what stop glass grinding directly on a stone or tile tabletop
- Aluminum brackets will not rust the way plated steel corners do
- Complete published dimensions — you can measure your burner and know
- 6.5 in is short; a tall flame on a windy night will still be pushed over the top
- Glass thickness is described as thick but never given a number
- Square only, so a round bowl is the wrong shape entirely
Owners of small square gas burners and tabletop gas pits.
Your burner is round or larger than 15 in — this simply will not fit.
We have not burned this unit. These are the things a specification sheet cannot answer, listed rather than glossed over.
- Glass thickness in millimeters
- Whether the panels are replaceable individually
#ad how we are funded · price as of October 18, 2026
BriSunshine Wind Guard, 41.5 x 13.5 x 6 in Rectangular
BriSunshineThe largest guard here at 41.5 in long, with thick tempered glass, aluminum corner brackets and rubber feet. Big rectangular dining tables with a full-length burner are exactly the tables that suffer most in wind, and nothing smaller covers them.
The largest guard here at 41.5 in long, with thick tempered glass, aluminum corner brackets and rubber feet. Big rectangular dining tables with a full-length burner are exactly the tables that suffer most in wind, and nothing smaller covers them.
- 41.5 in covers the long burners that shorter guards leave half exposed
- Rubber feet and aluminum brackets, the two details that decide longevity
- 13.5 in of width suits the wider troughs on dining-height tables
- Large glass panels are the ones most likely to arrive damaged in shipping
- Heavy and awkward to lift off for cleaning single-handed
- Still only 6 in tall, so gusts will reach over it
Owners of large rectangular gas dining tables with a full-length burner.
Your burner is under 30 in — the Nuu Garden covers it for less money and less bulk.
We have not burned this unit. These are the things a specification sheet cannot answer, listed rather than glossed over.
- Glass thickness in millimeters
- Packaging quality for shipping
#ad how we are funded · price as of October 18, 2026
BriSunshine Glass Wind Guard, 16 x 16 x 6 in
BriSunshineSixteen inches square and 6 in tall, from the same maker as the 41.5 in guard. The listing is thin compared with that one, but all three dimensions are published, which is the minimum you need to buy glass that has to fit.
Sixteen inches square and 6 in tall, from the same maker as the 41.5 in guard. The listing is thin compared with that one, but all three dimensions are published, which is the minimum you need to buy glass that has to fit.
- All three dimensions published, so fit is checkable
- 6 in tall, slightly more shelter than the 15 in BOMINICA
- Same brand as the large rectangular guard if you want a matched set
- This listing states neither tempering nor bracket material, unlike the maker's larger guard
- Between the BOMINICA at 15 in and the vchin at 17.5 in, it is a narrow fit window
- No rubber feet stated, so check before standing it on stone
Owners of a 16 in square burner who want an exact-size guard.
Your burner is 15 in or smaller — the BOMINICA publishes more and costs less.
We have not burned this unit. These are the things a specification sheet cannot answer, listed rather than glossed over.
- Whether tempered
- Bracket and foot detail
#ad how we are funded · price as of October 18, 2026
Skyflame Round Glass Wind Guard, 33 x 7 in
SkyflameThe only round guard here, and at 33 in across it covers the large round gas bowls that every rectangular guard ignores. It is also the tallest at 7 in. Expensive, but for a round table there is genuinely not much competition.
The only round guard here, and at 33 in across it covers the large round gas bowls that every rectangular guard ignores. It is also the tallest at 7 in. Expensive, but for a round table there is genuinely not much competition.
- Round, which solves a shape that the rest of this category simply does not serve
- 7 in is the tallest here, so it blocks more of a leaning flame
- 33 in fits the large round gas bowls common on patio sets
- The most expensive guard here by a clear margin
- The listing does not state brackets, feet or glass thickness
- A 33 in glass ring is heavy and needs two hands and some care
Owners of round propane fire bowls and round gas tables.
Your burner is rectangular. Every cheaper option here is a better fit.
We have not burned this unit. These are the things a specification sheet cannot answer, listed rather than glossed over.
- Whether it is tempered
- Bracket and foot design
- Panel count
#ad how we are funded · price as of October 18, 2026
vchin Square Glass Wind Guard, 17.5 in
vchinSquare and 17.5 in, filling the gap between the 15 in BOMINICA and the rectangular guards. The listing publishes the width and nothing else, so it is a fit-first purchase rather than a spec-led one.
Square and 17.5 in, filling the gap between the 15 in BOMINICA and the rectangular guards. The listing publishes the width and nothing else, so it is a fit-first purchase rather than a spec-led one.
- Covers the 16 to 17 in square burners that fall between the other sizes here
- Cheaper than the round and long rectangular options
- Simple square format that suits most square gas tables
- No published height, which is the dimension that decides how well it works
- No bracket or foot detail — unknown whether glass contacts the table directly
- Not stated as tempered, unlike the BOMINICA and BriSunshine listings
Square burners around 17 in where the 15 in guard is too small.
You want a stated tempered-glass spec. Two other guards here publish it.
We have not burned this unit. These are the things a specification sheet cannot answer, listed rather than glossed over.
- Height
- Whether the glass is tempered
- Bracket material
#ad how we are funded · price as of October 18, 2026
Why gas needs this and wood does not
A wood fire has thermal mass. Wind makes it burn faster and throws sparks, but a bed of coals does not go out because a gust crossed the yard. A gas flame has no mass at all — it is burning at the burner port and nowhere else, and a strong enough gust simply separates the flame from the port and extinguishes it.
On a modern gas fire table with a thermocouple, that is a safety shutdown rather than a hazard: flame out, gas off. But it makes the pit unusable on exactly the evenings you most want it, and it is the single most common complaint about gas tables on open patios. Relighting a pit four times through dinner gets old quickly.
Turning the burner up is the instinctive fix and it is the wrong one. A taller flame is more exposed to the wind, not less, and it burns through the tank faster — the arithmetic on that is in how much propane a fire pit uses.
Measure the burner, not the table
This is where the purchase goes wrong. The guard sits around the burner opening in the middle of the table, and it is sized to that opening plus the bracket footprint — not to the tabletop and not to the pit's overall dimensions. A 44 in table very often has a 28 in burner trough.
- 1Measure the length and width of the burner opening — the recess the flame comes out of, at the tabletop surface.
- 2Add nothing. Guards are listed at the size of the glass rectangle they form, and they are designed to stand around the opening.
- 3Check the height you want. Most guards here are 5.5 to 7 in. Taller blocks more wind and is more visible.
- 4Confirm the shape. A round bowl needs a round guard; there is no rectangular workaround.
- 5Check what sits under the glass. Rubber feet protect a stone or tile top; bare glass on stone chips both.
| Guard | Dimensions | Shape | Tempered stated |
|---|---|---|---|
| Nuu Garden | 28.7 x 10.2 x 5.5 in | Rectangular | Yes |
| BOMINICA | 15 x 15 x 6.5 in | Square | Yes |
| BriSunshine 41.5 | 41.5 x 13.5 x 6 in | Rectangular | Yes |
| BriSunshine 16 | 16 x 16 x 6 in | Square | Not stated |
| Skyflame | 33 x 7 in | Round | Not stated |
| vchin | 17.5 in wide, height not stated | Square | Not stated |
Three of six state tempering and one does not publish its height at all. On a product that sits in a flame, those omissions are the ranking.
What a guard does to the flame
Two things, and the second one surprises people. It shelters the flame from crosswind, which is the reason you bought it. It also makes the flame look taller and steadier, because the glass holds the warm air column together instead of letting it shear apart — the same reason a hurricane lamp works.
What it does not do is change the heat you feel. Glass is effectively transparent to the radiant heat you are warmed by, so a guard neither blocks nor boosts warmth in any way you would notice. If heat output is the actual problem, that is a burner question rather than an accessory one, and it is covered in the BTU guide.
Glass, brackets and the parts that fail
Wind guards fail in three predictable places, and none of them is the glass spontaneously breaking. They fail at the corner brackets, which is why aluminum matters — plated steel corners corrode where they meet the tabletop and then stain it. They fail at the feet, where bare glass grinding on stone chips the edge. And they fail in shipping, which is a real risk on the larger panes.
Cleaning is the routine part. Gas burns clean but a patio does not, and a guard collects dust, pollen and the occasional splash. Wait until it is fully cold, lift it off if it is a bracket assembly rather than a fixed frame, and use ordinary glass cleaner. Nothing abrasive — a scratched pane in front of a flame is very visible at night.
When a guard is not the answer
If the flame is blowing out in still weather, wind is not your problem — look at the regulator, the tank and the connection instead, which is covered in propane tanks and hookups. If the pit is in a genuine wind tunnel, glass at the burner will not fix a site problem. And if you are shopping for a portable pit that gets carried to the beach, a fixed glass guard is the wrong category entirely; portable propane fire pits is the better starting point.
What we would skip
- Any guard bought before measuring the burner
This is a fit-critical product being sold as a generic accessory. Guards are sized to the burner opening, not to the table, and returning a large pane of glass is exactly as unpleasant as it sounds.
- Guards that do not state tempered glass
Half the listings here say tempered and half just say glass. Tempered is what fails into blunt fragments rather than shards, and it is not a detail to assume on a product that sits in a flame.
- A wind guard as a fix for a fire pit in the wrong place
A guard blocks the wind at the burner. It does nothing about a pit sited in a wind tunnel between two buildings, where the answer is to move the pit rather than to put glass around it.